Application of ITS Chuck
Publish Time: 2018-07-14 Origin: Site
The ITS flexible positioning system of A-ONE’s fixture is a standardized fast clamping system. The concept originated in Europe.
The workpiece or electrode along with the pallet enters the process of turning, milling, grinding, wire cutting, electric machining, etc.
The standard positioning between the bottom of the pallet and the chuck (fixed on the machine table or spindle), clamping the mechanical
interface, so that the standard mechanical interface repeat positioning accuracy of 2 microns, and the clamping time takes only a few seconds .
Therefore, the workpiece and the electrode can be installed outside the machine, and the compensation value can also be measured outside
the machine, so that the program can be pre-programmed to realize the rapid standard exchange of the workpiece or the electrode between
the processes, which eliminate the time for clamping, correction, tooling and other process, greatly improve efficiency, save costs, and make
production automation possible.